$799.99
2-WAY FULL FEATURE CAR ALARM - REMOTE START | USB CHARGING - 1pcs 2-WAY HD COLOR PAGER & 1pcs 5-BUTTON REMOTE - ONE MILE RANGE (NOT GUARANTEED) | VIPER START SMART COMPATIBLE (REQUIRES SUBCRIPTION & ADDITIONAL MODULE)Viper's first one-mile range color remote, using 900 MHz Spread Spectrum Technology (SST) - A brand new user interface, for the first time utilizing the patented Menu Wheel -New custom Viper animations, to confirm user commands and illustrate system events, on a 128 x 128 pixel Organic Light Emitting Diode (OLED) high contrast panel, with 262K and 65K full colors, and a wide 160° viewing angle, employing an anti-glare polarizer for enhanced daylight visibility - The OLED display panel on the Viper Responder HD color remote is 20% larger than previous LCD panels on a keychain remote.Built-in Info Center: the Responder HD status screen has an information center built into it! The Info Center displays the remote start run-time remaining before the engine shuts off, as well as the vehicle interior temperature, so you know if it has warmed up or cooled off enough to make your drive comfortable. It also displays the Countdown and Parking Meter timers when running, and the Parking meter timer emits warnings at 15 minutes, 5 minutes and at expiration so you can make sure to feed the meter. Also, you can stop, start or clear these timers any time in the Status Screen using the Menu Wheel. These 4 bits of information can be displayed in the Info Center by pressing the menu wheel while the Status screen is active to toggle and show each one. Two Car operation: when users decide to change to a paired 2nd vehicle, Responder HD will automatically check the vehicle's availability, and if the desired car is not available it will let you know. If the vehicle is available, it will automatically update the information displayed on the status screen so you know if it needs to be disarmed, or if the engine is running. Security system Sensor Status in real-time: when arming with a security zone active, Responder HD will receive a report that will identify by name the active zone and display a special icon in the Status Screen. The report will identify all zones that are active (up to 7) by name during the report output.NEW FEATURE: For the first time, Responder HD reports any sensors that have been bypassed by the Nuisance Prevention Circuitry (NPCTM) feature when arming and have a special Sensor Status icon that is displayed in the Status Screen. Any time there is a change of status in the sensors (NPC or a bypassed zone resets,) Responder HD will receive a message from the system and the All Zones OK icon will be displayed. Sensor Bypass: users can bypass sensors by selecting the level and sensors they wish to bypass. Responder HD will identify the bypassed sensors on-screen and by name so the user knows exactly the level of security they have chosen. After bypassing sensors, the Sensor Status icon will be updated so the user can easily see those sensors are bypassed each time the Status Screen is displayed. Remote start Fault and Not Available reporting: if the user attempts to operate a security or remote start feature that is not available, Responder HD will identify the fault so it can be quickly resolved. The intended use and user value of Viper Responder HD constitute nothing less than a new higher level of connection between drivers and their vehicles. With an MSRP of $799, Responder HD is a new level of luxury in the world of vehicle security and convenience. From up to one mile distance from their vehicle, users can stay in constant contact using an advanced and elegant, full-color interface device: their Responder HD keychain remote.
No properties for this product.
